schneider lxm05 and Twido (CanOpen)

musaratm

Member
M
Join Date
Aug 2009
Location
@ home
Posts
2
Lexium 05 works perfectly when controled via PowerSuite, but i can not control it via Twido (CanOpen). Can You send me simple program, where Twido sends Lexium command, just to rotate BSH motor at some speed ( for exemple 2000 rev/min).
I have LXM05AD10M2 , TWDLMDA20DRT with Can expansion module, BSH motor and TwidoSuite 2.01.
It would be very helpfull.
 

Similar Topics

ControlSystems
Schneider Modicon M221 & Machine Expert Basic Programming Application
Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
4
Views
123
Lare
L
R
Schneider Control Expert Multiple Monitors
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
67
dalporto
dalporto
K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
84
[email protected]
K
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
173
S.Woollett
S
M
Pack drive elau Schneider ISH-100
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
88
Munish
M
Back
Top Bottom