Schneider STB NIP2212 Error Register ?!

iJAF

Member
I
Join Date
Sep 2010
Location
PT
Posts
14
Hi, i'm searching for the register bit that indicates an error on NIP2212 caused by any of the modules error, but i can't find it.

i'm trying with register 45391 (bit 6) but it is not working :\ !

Any ideas ?!

Thanks in advance!!
 

Similar Topics

I
Schneider M340+NIP2212 STB - TTL issue!
Hi, I'm using a schneider M340 modicon PLC with some STBs NIP2212 in a big gigabit optic fiber ring topology network !!! Everything is working...
Replies
5
Views
3,361
iJAF
I
A
Schneider Advantys STB Remote I/O Addressing
Hi all, TL;DR - what structure does an input/output address from an STB RIO rack have in Schneider programming software? I'm designing a...
Replies
9
Views
3,874
V0N_hydro
V
B
Schneider Advantys STB NIP 2212 doesn't get IP via DHCP
Hello! I'm trying to get an I/O-island, Schneider Electric Advantys STB NIP 2212, to get an IP-address from a DHCP server by putting the switches...
Replies
13
Views
7,852
blasmurf
B
R
Schneider Control Expert Multiple Monitors
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
53
dalporto
dalporto
K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
60
[email protected]
K
Back
Top Bottom