Schneider TM3DQ16T/TG

chud

Member
Join Date
Oct 2007
Location
KALAHARI
Posts
1,123
Hi guys. Just wanted to know if these output cards have an internal fuse or not. I have the data sheets but it is unclear. The wiring diagram show its must be fused externally for the supply but also states it has short circuit protection.
Thanks for any info
 

Similar Topics

Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
0
Views
27
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
64
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
63
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
169
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
86
Back
Top Bottom