Schneider TSX87 / PL7-3 Software

thiagotra

Member
T
Join Date
May 2006
Location
Rio de Janeiro
Posts
6
This PL7-3 and MiniXTel needs a hardkey to open the software! Does any one knows how to copy the key? I have the key holder and I have on key working and i have others without license!

I know there´s another software, i think another version, that doesn´t need this hardkey. it uses a serial number!
Does anyone uses this? How can i get?

Please, help-me!

Thanks!
 

Similar Topics

K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
48
[email protected]
K
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
143
S.Woollett
S
M
Pack drive elau Schneider ISH-100
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
71
Munish
M
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
123
Para
P
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
201
jillgeorge18
J
Back
Top Bottom