Hi All,
I am new to this site and I am looking for some help,
I am trying to send ASCII characters to a unit that performs a task via a 1734-232ASC module which is connected to a 1734-AENTR series B Point IO then connected to a CompactLogix L36ERM PLC,
I don't have much experience in sending these as strings to the unit,
I have configured the 1734-232ASC unit as per the manufacturer spec, the typical commands for example would be,
/1ZR which homes the unit,
/1A300R moves the unit to position 300
I have sent these from a desktop serial connection software and it works but now would like to send via the plc
Just looking for some help on how to set up the strings and sent the correct data if you have any info I would be very grateful
Thanks,
I am new to this site and I am looking for some help,
I am trying to send ASCII characters to a unit that performs a task via a 1734-232ASC module which is connected to a 1734-AENTR series B Point IO then connected to a CompactLogix L36ERM PLC,
I don't have much experience in sending these as strings to the unit,
I have configured the 1734-232ASC unit as per the manufacturer spec, the typical commands for example would be,
/1ZR which homes the unit,
/1A300R moves the unit to position 300
I have sent these from a desktop serial connection software and it works but now would like to send via the plc
Just looking for some help on how to set up the strings and sent the correct data if you have any info I would be very grateful
Thanks,