Musbtr1pin
Member
Anyone know how to receive the string (UPC Code) from a dataman 302 (Cognex) to a SLC 5/05. I need to be able to retrieve this code, and I am having some issues with my MSG command.
Sending A String (UPC Code) from a Dataman 302 Vision System to a SLC 5/05
- Thread starter Musbtr1pin
- Start date
controlseng82
Member
I just set up a Dataman 302 to a micro 1400. In the Cognex Dataman folder there is a messaging example for the slc500. There are a 3 messages, one primes the communications, one triggers, and the third requests the data.
Similar Topics
I am using a compactlogix 1769-L16ER BB1B to send a print string to a L-series Mathew printer. My main question is can I setup a TCP/IP...
Hello everyone, what I am trying to do is import a specific string directly into a cell in an excel sheet. I have been using the Copy DDE/OPC link...
Hi,
I have a retrofit enhancement on an existing PV1000 (Not PV +).
It is a 2711-T10C10 with a RS232 port and DeviceNET.
I need to send a string...
I would like to send a simple ASCII string from a PanelView 550 Printer port with a button press.
String Sample:
ABCDF 1
Any Ideas?
I used DDE to message down data to a bunch of PLCs, most of the time it is all numeric and this works fine.
However with this latest PLC I have...