boiler-todd
Member
Hi everyone. I have an application and I am looking for some useful advice. I need to sense a metal scrap trailer so that when it gets pulled out and replaced that I have my AB 5/05 record the time stamp. We want to simply know when our trailers are getting pulled out so we can make sure we are getting proper payment back for the scrap metal. Financial Controls group mandate.
Anyway, I am looking at using a Banner M-gage S18M to detect the trailer. Has anyone used these before that can tell me if they like them or not.
As an enhancement, I wanted the PLC to just save the time stamp to an Xcel spreadsheet. I have never done this before. Can someone tell me what is needed to do this. Would I have to upgrade RSLinx from my Classic version?
Thanks for your help!
Anyway, I am looking at using a Banner M-gage S18M to detect the trailer. Has anyone used these before that can tell me if they like them or not.
As an enhancement, I wanted the PLC to just save the time stamp to an Xcel spreadsheet. I have never done this before. Can someone tell me what is needed to do this. Would I have to upgrade RSLinx from my Classic version?
Thanks for your help!