Servo Hyd Valve Connector

[CharlesM]

I am using Bosch servo hyd valves with Hirschmann (932 460-100) connectors. I would like to purchase a premade molded cable. I have looked around and found Peters-Ind (p/n 901105) that will work. But after several emails to them and their US distributor I am looking for another source. I did check on having a local company make them for me but they were very $$. It looks to me like most of the hyd servo vales are using the same connector. Does anyone know where I can purchase premade cables for them?

Attached is the information from Peters on the cables

 

[TimWilborne]

I would check with Flex-Cable. They will probably not have the cable in their catalog but they will make it for you quick and at a reasonable price. I have had excellent service out of them. You can find a picture of one of their cables and your typical cable HERE

 

[CharlesM]

I will check with Flex-Cable on Monday. It looks like they can do it. Any other suggestions?

 

[TimWilborne]

It depends on how much abuse the end of the cable is going to be subject to. This cable will definitely do the job but could be overkill. But feel it is better to be over then build it too weak

 

[servoguy101]

How many?length of cable? What bosch valve number? ( 0811-404-XXX). there are several companies that sell prefab cables or I can make them for you. www.atlanticservo.com thanks, David