I want to download the program to the PLC Omron CQM1H-CPU21 using RS232, but an error message appears Dip Switch settings are wrong, therefore how the Dip Switch settings correctly to get in line? Where can I get CQM1H-CPU21 manual for free? Thank's
Setting Dip Switch for Donwload to Omron CQM1H-CPU21
- Thread starter wiwie
- Start date
Similar Topics
Hi,
I am connecting a PLC to a Proface touch panel. The node id of the CANopen bus on the PLC is 1 and on the Proface model is 3. The CANopen on...
Good morning fellow sea captains and wizards,
I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
SELECTED NEW FILE
SELECTED PROCESSOR TYPE
SELECTED I/O CONFIGURATIONS
IM UNABLE TO CONFIGURE MY I/O’S.
I HAVE A PAPER COPY OF A PROGRAM AND I...
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Hello,
I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...