Setting PG interface

rj061991

Member
R
Join Date
May 2014
Location
iligan city
Posts
75
hi!

i would like to ask on how to set the PG interface of my computter to pc/ppi... im using usb/ppim(ppi multi cable controller)...But when im trying to install the pc/ppi interface it says that " you changed the access point or interface parameters." Thank you for the advices..

I attach the screenshots of the Pg interface...

PG.jpg
 

Similar Topics

Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2 3
Replies
32
Views
913
Rsflipflop256
Rsflipflop256
T
Setting PG/PC Interface S7
Good day people. I'm having difficulty communicating with s7 300 PLC. i have a PC Adapter v5.1 6ES7 972-0CA23-0XA0(MPI-RS232). I also have a...
Replies
14
Views
9,042
Tharon
T
T
SETTING UP I/O USING LOGIXPRO RS 500 EMULATOR
SELECTED NEW FILE SELECTED PROCESSOR TYPE SELECTED I/O CONFIGURATIONS IM UNABLE TO CONFIGURE MY I/O’S. I HAVE A PAPER COPY OF A PROGRAM AND I...
Replies
0
Views
93
TFLARIS
T
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
253
LMDAVE
L
U
Setting up WAGO PFC 200 750-8216 as a Profibus Slave
Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
94
udit_91
U
Back
Top Bottom