Patch102860
Member
Need some guidance and even a sample program to set my analog card to work with a CS1G-CPU42H PLC
Trying to understand my analog out and would like to create a sample program so I could use a meter on the output of the card to see different voltages when certain bits are high for example:
210.00 = 1v
210.01 = 2v
210.09 = 10V
The card Machine no is set to 0 and the unit no is set to 2 so if I read the manual correct m=D20200 and the CIO = 2200???
Trying to understand my analog out and would like to create a sample program so I could use a meter on the output of the card to see different voltages when certain bits are high for example:
210.00 = 1v
210.01 = 2v
210.09 = 10V
The card Machine no is set to 0 and the unit no is set to 2 so if I read the manual correct m=D20200 and the CIO = 2200???