Sicam230 communication with ET 200M via profinet.

j173

Member
J
Join Date
Apr 2013
Location
Manchester
Posts
1
Hi,
I need to establish communication between an ET 200M and the SCADA software Sicam230. I have the ET 200 and the cp 1612 connected to the ethernet network in Simatic. How do i configure my scada software and network settings so the Scada system can see changes in the ET 200M input module?
 

Similar Topics

F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
0
Views
60
felipealencr
F
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
37
Tinx12
T
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
42
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
103
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
135
mk42
M
Back
Top Bottom