martin_martin
Member
Hi Guys,
I have a new 4 Quadrant 6ra70 DC Master from Siemens; it is basically to replace an existing 6RA24.
I have a digital input going into the drive at terminal 40. (I have a CUD2 PCB). Basically what should happen is when the digital input is normally open (contact) the drive should operate in the forward direction (normal) and when this contact changes to a normally closed contact the drive must go in the reverse direction.
I need to know what parameters to program in drivemonitor to do this function properly. Can anybody help please?!!
I have a new 4 Quadrant 6ra70 DC Master from Siemens; it is basically to replace an existing 6RA24.
I have a digital input going into the drive at terminal 40. (I have a CUD2 PCB). Basically what should happen is when the digital input is normally open (contact) the drive should operate in the forward direction (normal) and when this contact changes to a normally closed contact the drive must go in the reverse direction.
I need to know what parameters to program in drivemonitor to do this function properly. Can anybody help please?!!