Siemens CP143 (6GK1143-0AA01)

The_Harlequin

Member
T
Join Date
Feb 2011
Location
Europe
Posts
30
Hello!
Does this module need any supply card for the 15V? 15v fault lit and there is no voltage in the AUI port. I don't find any manual on this card so I hope that someone know this.
 

Similar Topics

C
PCLink2 with Siemens CP143
Hi, I would like to find the procedure to setup PCLink2 (ISA card in PC) to communicate with Siemens CP143. I know that this card is very old...
Replies
6
Views
3,605
umair2282
U
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
5
Views
37
JesperMP
JesperMP
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
302
JesperMP
JesperMP
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
163
bkottaras
B
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
313
John Lee
J
Back
Top Bottom