Siemens CP5511 PCMCIA Card

agrosse

Member
A
Join Date
Aug 2011
Location
Grand Haven
Posts
24
[FONT=&quot]Everytime I install the drivers for a Siemens CP5511 PCMCIA card, it assigns an Interrupt Request (IRQ) value from Windows of 19. As the only five IRQ values acceptable are all below 15, including those that are already utilized by devices within the configuration of my machine, I'd be curious as to why Windows is assigning it such a value.[/FONT]
 

Similar Topics

N
Siemens CP5511/CP5512
Hi, I'm working with following settings: CPU 319-3 PN/DP CP5511/CP5512 WindowXP professional Siemens S7 V5.4 It was working all fine until I...
Replies
7
Views
5,162
Fred Mau
F
M
Siemens CP5511
I have just installed Step 7 ver. 5.3 but I have a problem. My CP5511 card has an error. When I want to diagnostic in PC-PG Interface it has an...
Replies
2
Views
4,611
dijk0807
D
rsdoran
Siemens CP5511 and/or CP5512
Anyone know the approximate retail cost of the CP5511 and/or CP5512?
Replies
5
Views
3,761
cpmiller
cpmiller
R
Setting up PC Station using Siemens CP5511
Hello, I've set up a PC Station on my laptop using Step7 ver 5.2 and Simatic Net V6.2 CD11/2003 on a Windows 2000 Professional SP4 platform. I...
Replies
0
Views
6,745
Rusty_K
R
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
210
mburtis
M
Back
Top Bottom