mad@imap
Member
Group,
I had failure on a back plane of a ET200s Remote rack.
The SF light was solid, and the BF light flashed as soon as you turned on power. We tried several thing from replacing the ET200s to replacing the I/O cards one at a time. None of this fixed the issue.
Eventually we replaced the entire backplane and all of the I/O modules and this got us up and running after 7 hours.
My question is, Is there a way to test the back plane so you don’t have to replace everything? This rack only had 30 I/O cards and it took some time to unwire and replace everything.
Does Siemens or anyone else make something to trouble shoot this?
I had failure on a back plane of a ET200s Remote rack.
The SF light was solid, and the BF light flashed as soon as you turned on power. We tried several thing from replacing the ET200s to replacing the I/O cards one at a time. None of this fixed the issue.
Eventually we replaced the entire backplane and all of the I/O modules and this got us up and running after 7 hours.
My question is, Is there a way to test the back plane so you don’t have to replace everything? This rack only had 30 I/O cards and it took some time to unwire and replace everything.
Does Siemens or anyone else make something to trouble shoot this?