If I have a FM352 camcard that triggers hardware interrupts on camtracks, and a new hardware interrupt from a camtrack is triggered while OB40 is still processing another camtrack, will the last hardware interrupt be lost or will it be processed afterwards?
Siemens FM352 camcard an interrupts
- Thread starter Plc_User
- Start date
Similar Topics
Hey Guys,
need help comparing Siemens FM 352 cam controller with S7-1500 input and output cards.
- Do i look for the input/output speeds ??
-...
Hi,
I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why?
Could...
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Hello
I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ?
Have to shut off main switch at least 10 times on...