Siemens IPC477C

KEN_KACEL

Member
Join Date
Nov 2002
Location
NORTH COUNTRY
Posts
162
I have IPC477C 6Av7884-5ag30-6ba0 bSiemens 19" Touch HMI

The Windows Explore IE5 is not working. I have tried to recover the windows exporer with no luck and I tried to reinstall
the windows again dead end. I get errors on the screen and all the errors on the WWW have solutions that don't work. I think because the hard drive is in compressed mode. I do not have the install disks and Siemens is qouting $500 for the install disks for the XT embedded. Does anyone have an install disk they can copy or want to part with. $$$ I am flat down and would like to find a cheaper alternative
 

Similar Topics

Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
4
Views
61
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
3
Views
82
Hello to all, I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Replies
11
Views
161
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
110
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
330
Back
Top Bottom