Siemens KTP600PN HMI Tags Question

ogie125

Member
ogie125
Join Date
Dec 2002
Posts
9
Hello Everyone,

Apparently I am only limited to use 128 tags for the Siemens KTP6000PN HMI. I hope this is not a silly question, but is there a way to get around this? I need to use and additional 40 tags. Thanks in advance.
 

Similar Topics

M
ISSUES ASSIGNING PROFISAFE ADDRESS TO SIEMENS ET200ECO PN IO MODULE
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
4
Views
62
AlfredoQuintero
A
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
3
Views
83
AlfredoQuintero
A
M
CodeSys - alternative to Siemens DB
Hello to all, I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Replies
11
Views
162
dwoodlock
dwoodlock
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
110
Lare
L
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
330
JesperMP
JesperMP
Back
Top Bottom