Siemens KTP600PN HMI Tags Question

ogie125

Member
ogie125
Join Date
Dec 2002
Posts
9
Hello Everyone,

Apparently I am only limited to use 128 tags for the Siemens KTP6000PN HMI. I hope this is not a silly question, but is there a way to get around this? I need to use and additional 40 tags. Thanks in advance.
 

Similar Topics

J
Siemens PLC Help
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
7
Views
160
dwoodlock
dwoodlock
Itshouldwork
A way to detect online, hardware and software changes of Siemens TIA Portal V17
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
84
mk42
M
M
ISSUES ASSIGNING PROFISAFE ADDRESS TO SIEMENS ET200ECO PN IO MODULE
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
152
baref00t25
B
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
5
Views
184
tdoa
T
M
CodeSys - alternative to Siemens DB
Hello to all, I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Replies
11
Views
182
dwoodlock
dwoodlock
Back
Top Bottom