Siemens Midimaster Vector and fault detection with PLC

[wuutronic]

Is there a way to program a digital output on Siemens MIDIMASTER Vector so I could detect the fault present (like overcorrect) with my PLC? I know there is a way to program digital input to clear the fault, but I hadn't found a way to detect one…

Here is some operation manual that I found. But it doesn't mention my problem

 

[silva.foxx]

Page 52 parameter P061 allows you to program in the first of two output relays RL1. This potential-free switch can be used to signal back to your plc any of them 12 functions.

 

[wuutronic]

Tnx! I don't know how I overlooked this parameter