siemens plc and novus device modbus

pratik8950

Member
P
Join Date
Mar 2013
Location
gujarat
Posts
7
hi i am using s7200 plc and novus controller DIN Rail 2A for my project

i am communicating novus device through modbus from s7226.

I am not able to get the results eventhough the communication is correct.

i have attached my code with this thread.

novus.jpg
 

Similar Topics

P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
0
Views
20
plc_siamens
P
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
328
JesperMP
JesperMP
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
135
mk42
M
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2 3
Replies
32
Views
874
Rsflipflop256
Rsflipflop256
D
Siemens PLC download with IO device
Hey guys, I have to take an upload of a program on an S71200 PLC to change a hardware config option and then redownload the program with this...
Replies
3
Views
118
JesperMP
JesperMP
Back
Top Bottom