yogi.g2982
Member
Hi all Expert,
I need help to develop PLC code. I have 11 no. of process tank in each tank thier is some process operation e.g Heater on/off,Temp.setpoint and Drain Valve on/off.For this process I want to use 5 no. of receipe in that receipe 3 no. of parameters setting is requied plz see below example for receipe-1.
for example Receipe-1 parameter Setting..
Tank Temp. Heater On/off Drain Valve On/off
Set point Selection Selection
Tank-1 50 0n off
Tank-2 60 on off
Tank-3 56 on on
Tank-4 67 on on
Tank-5 98 off off
Tank-6 102 off off
Tank-7 23 on on
Tank-8 14 on on
Tank-9 35 off off
Tank-10 67 off off
Tank-11 88 on on
Tank-12 56 on on
for remaining 2,3,4 and 5 receipes thier will be diferent setting like Temp set point,Heater on/off Selection and darin on/off selection it is totaly depend on process requirment.
Please help to How to write above PLC code.
Waiting for your positive reply.
Regards,
Yogendra G.
I need help to develop PLC code. I have 11 no. of process tank in each tank thier is some process operation e.g Heater on/off,Temp.setpoint and Drain Valve on/off.For this process I want to use 5 no. of receipe in that receipe 3 no. of parameters setting is requied plz see below example for receipe-1.
for example Receipe-1 parameter Setting..
Tank Temp. Heater On/off Drain Valve On/off
Set point Selection Selection
Tank-1 50 0n off
Tank-2 60 on off
Tank-3 56 on on
Tank-4 67 on on
Tank-5 98 off off
Tank-6 102 off off
Tank-7 23 on on
Tank-8 14 on on
Tank-9 35 off off
Tank-10 67 off off
Tank-11 88 on on
Tank-12 56 on on
for remaining 2,3,4 and 5 receipes thier will be diferent setting like Temp set point,Heater on/off Selection and darin on/off selection it is totaly depend on process requirment.
Please help to How to write above PLC code.
Waiting for your positive reply.
Regards,
Yogendra G.