Ken J
Member
I'm starting a new job and my first project will involve
programming a small Siemens PLC. I have done plenty of
AB SLC and Toshiba T1 programming. Can anyone advise me
on the best way to come up to speed on the Siemens line
of small PLCS. I'm not sure the model number, however, since
I haven't started my new job. I believe it may be a step 2000.
Thank you.
programming a small Siemens PLC. I have done plenty of
AB SLC and Toshiba T1 programming. Can anyone advise me
on the best way to come up to speed on the Siemens line
of small PLCS. I'm not sure the model number, however, since
I haven't started my new job. I believe it may be a step 2000.
Thank you.