Siemens Starter Software

[Jim G.]

I need to make a parameter change on a drive using STARTER. I am using this for the first time so I want to make sure I am doing this right.
I can be online with the drive, make the change and it will take effect immediately. To keep the change in the drive, I must do a "copy RAM to ROM".
To update the change on my PG, just save project.
Is this correct?

 

[mk42]

To update the change on my PG, just save project.

To update the change on your PG, you need to UPLOAD, then save.

Otherwise, it sounded right to me. That said, i only dabble in drives, soooooo...... use advice at your own risk.