Siemens TTY-TTY cable

Plc_User

Member
Join Date
Dec 2005
Location
Belgium
Posts
317
I know I can order a Siemens cable for TTY to TTY communication, but it is very expensive.
I found a wiring diagram for this cable, but there seem to be
zenerdiodes in it. Are they realy necessary, and if yes, what specifications do they have?
Has anyone experience in making this cable by himself?
It's for communication between S5 and OP77B.

Panels_Anschlussleitungen_Kabelbelegung_01_e.jpg
 

Similar Topics

Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
2
Views
92
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
9
Views
286
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
103
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
159
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
5
Views
197
Back
Top Bottom