I'm simulated a few different styles of dosing with my rslogix5000 emulator and a wonderware application I made for it. Everything works great and I'm about to display the dosing and all the functions but I have to manually enter the GPM value in the program ( obviously because there isn't a flow sensor, its just a simulation)..
Anyone have a good way of simulating my values to change and bounce around from the 4.00 - 8.00 GPM range.. I guess I could figure it out doing a lot of computation instructions but I figured there has to be an easier way? I basically don't want it to stay at a steady flow rate because I'm testing my deviation displays and a few other things. Plus it looks more realistic. Muchas gracias
Anyone have a good way of simulating my values to change and bounce around from the 4.00 - 8.00 GPM range.. I guess I could figure it out doing a lot of computation instructions but I figured there has to be an easier way? I basically don't want it to stay at a steady flow rate because I'm testing my deviation displays and a few other things. Plus it looks more realistic. Muchas gracias