Hi... First post so be kind....
I'm setting up an SlC5/03 to talk via a 1761-net-eni and getting a wierd commas error which I can't find any reference for in searching..
I have configured the net-eni fine(I think) as in rslinx I can see the plc (it shows the type and name correctly) but I can't drill down.
When I look at the station diagnostics I get " communication status: ERROR " and in the driver diagnostics I get an "unable to establish TCP connection" due to "can't set port type to 288: no harmony object for this Ethernet"
If i talk directly via serial all is fine and connection works well (rs232 df1)
But over Ethernet (ab-eth1) I can't drill down ...(though the data table monitor shows up the tables correctly)
So.. What step am I missing to get this commas working to rslinx...
Any help will be greatly appreciated, thanks
I'm setting up an SlC5/03 to talk via a 1761-net-eni and getting a wierd commas error which I can't find any reference for in searching..
I have configured the net-eni fine(I think) as in rslinx I can see the plc (it shows the type and name correctly) but I can't drill down.
When I look at the station diagnostics I get " communication status: ERROR " and in the driver diagnostics I get an "unable to establish TCP connection" due to "can't set port type to 288: no harmony object for this Ethernet"
If i talk directly via serial all is fine and connection works well (rs232 df1)
But over Ethernet (ab-eth1) I can't drill down ...(though the data table monitor shows up the tables correctly)
So.. What step am I missing to get this commas working to rslinx...
Any help will be greatly appreciated, thanks