Hello,
Iam quite new with AB plc's and panelviews so i have a question:First I give data of the stuff I got: SLC5/03
PV 600 2711-B6C9 rev 3.3
1747-PIC
2711-nc13
When I connect the plc directly to the 1747-pic and the laptop I have a connection;upload,download no problem.
When I connect the PV600 directly to the pc with 2711-nc13 I can upload en download.No problem.
When I connect the plc (rs232)to the panelview (communicationport)with 2711-NC13 I have no connection.
I have set the channels to the correct adres and baudrate so this can't be the problem.
The node adres of the pc=0
The node adres of the plc=1
The node adres of the pv=2
Al the baudrates are 19200.
Do I need to write the software in the plc first in order to make connection with the pv?I think I can make a connection directly without writing the software first.
Can somebody give me any hints to make a connection between the pv and the plc?
thanks for the effort!
grtz Simon
Iam quite new with AB plc's and panelviews so i have a question:First I give data of the stuff I got: SLC5/03
PV 600 2711-B6C9 rev 3.3
1747-PIC
2711-nc13
When I connect the plc directly to the 1747-pic and the laptop I have a connection;upload,download no problem.
When I connect the PV600 directly to the pc with 2711-nc13 I can upload en download.No problem.
When I connect the plc (rs232)to the panelview (communicationport)with 2711-NC13 I have no connection.
I have set the channels to the correct adres and baudrate so this can't be the problem.
The node adres of the pc=0
The node adres of the plc=1
The node adres of the pv=2
Al the baudrates are 19200.
Do I need to write the software in the plc first in order to make connection with the pv?I think I can make a connection directly without writing the software first.
Can somebody give me any hints to make a connection between the pv and the plc?
thanks for the effort!
grtz Simon
Last edited: