After rebooting PC I can easy download any programm to 1747-L532. But it can be done just once. But if I want to do it second time (with small programm changes) during downoading process will it's appear flashing of FLT LED (on downloading step "writing executable file").
If i start to upload programm from SLC. I will get next "Error message":
Fault code = 0001h
Default program loaded due to NVRAM error. A corrupt CRC was detected (loss of battarey power may cause this), or a power cycle in the middle of the user program download, initialize memory, or memory module load.
Cannot go online or upload from DEFAULT processor (no program). You must perform download.
I can start to download programm to SLC 5/03 only after rebooting my PC.
What it can be? Is it battery problem?
If i start to upload programm from SLC. I will get next "Error message":
Fault code = 0001h
Default program loaded due to NVRAM error. A corrupt CRC was detected (loss of battarey power may cause this), or a power cycle in the middle of the user program download, initialize memory, or memory module load.
Cannot go online or upload from DEFAULT processor (no program). You must perform download.
I can start to download programm to SLC 5/03 only after rebooting my PC.
What it can be? Is it battery problem?