Hi,
I need to replaca a SLC 5/04 communicating with DH+ and RS232.
CH1 : DH+ on NODE 2 at 57.6k
CH0 : RS232
I have a plc rack and the new plc in my office. I have connected the slc with serial communication and added a new driver in RSLINX.
When I try to download the program into the PLC, I always have 2 questions to answer..
I suppose that I have to asnwer YES at the 1rst one..and then I get :
.
If I do that, I can go online and if I check the channel configuration, I have DF1 full duplex on the CH0 system.
Am I going to be able to use the serial connection to go online after I moved the PLC in the electrical panel?
Thanks
Martin....confused!
I need to replaca a SLC 5/04 communicating with DH+ and RS232.
CH1 : DH+ on NODE 2 at 57.6k
CH0 : RS232
I have a plc rack and the new plc in my office. I have connected the slc with serial communication and added a new driver in RSLINX.
When I try to download the program into the PLC, I always have 2 questions to answer..
I suppose that I have to asnwer YES at the 1rst one..and then I get :
If I do that, I can go online and if I check the channel configuration, I have DF1 full duplex on the CH0 system.
Am I going to be able to use the serial connection to go online after I moved the PLC in the electrical panel?
Thanks
Martin....confused!