jkelleyus
Lifetime Supporting Member
OK, All... out of the hundreds of different comm scenarios I've found here I cannot seem to get this one licked.
I have a SLC 5/04 that controls a few last nodes on DH-485, which we're trying very hard to migrate away from....
Next node up for migration is a SLC 5/03. We hooked this up to a NET-ENI and can see it in RSLINX and connect to via Ethernet. Physical connection works!
Since I have a Controllogix DHRIO on the same DH+ network with the SLC 5/04 I need to talk to... I thought this would be a snap but so far no love.
I set up a routing table in the DHRIO as described in technote 32116 (which covers messaging through a SLC 5/04 to DHRIO to SLC 5/05). Not my exact scenario but I thought it would help.
Anyhow, when trying to do a test read MSG from the 5/04 through DH+ to the remote DHRIO I get a "Target Node not responding" error.
Does anyone have any pointers or 'gotcha's' with this setup. Do I need to do something on the NET-ENI side as well?
Any help would be greatly appreciated!!
Thanks, John
I have a SLC 5/04 that controls a few last nodes on DH-485, which we're trying very hard to migrate away from....
Next node up for migration is a SLC 5/03. We hooked this up to a NET-ENI and can see it in RSLINX and connect to via Ethernet. Physical connection works!
Since I have a Controllogix DHRIO on the same DH+ network with the SLC 5/04 I need to talk to... I thought this would be a snap but so far no love.
I set up a routing table in the DHRIO as described in technote 32116 (which covers messaging through a SLC 5/04 to DHRIO to SLC 5/05). Not my exact scenario but I thought it would help.
Anyhow, when trying to do a test read MSG from the 5/04 through DH+ to the remote DHRIO I get a "Target Node not responding" error.
Does anyone have any pointers or 'gotcha's' with this setup. Do I need to do something on the NET-ENI side as well?
Any help would be greatly appreciated!!
Thanks, John