Tim Ganz
Member
I have a SLC 5/05 that faulted with a S:5 minor error bit and I can't figure out what that is.
It says "A minor error bit is set at the end of the scan. Refer to S:5 minor error bit"
On the errors tab sone of the S:5 bits are high. they all have 0 in the box? I have S:5/0 through S:5/4 and S:5/11 and S:5/15
How can I find what caused this?
It says "A minor error bit is set at the end of the scan. Refer to S:5 minor error bit"
On the errors tab sone of the S:5 bits are high. they all have 0 in the box? I have S:5/0 through S:5/4 and S:5/11 and S:5/15
How can I find what caused this?