SLC 5/05 showing up as an unregonized device

Canyon

Member
C
Join Date
Feb 2008
Location
North Carolina
Posts
6
Brain fade, I'm trying get online with a slc 5/05 over a crossover cable in my laptop. Processor IP 10.160.244.199, driver in rslinx is configured with this IP and my eds files are loaded due to the fact I can see all other processors over my wireless. but for some reason when I browse my second driver it shows up with a red X and is unrecognized. any help would be greatly appreciated.

Canyon
 
Does your laptop enet card have an IP address of 10.160.244.xxx? Have you tried switching off the wireless portion of your laptop? Maybe linx is trying to find the SLC5/05 over wireless. Shutdown linx, shutdown wireless, restart linx.
 

Similar Topics

M
SLC 5/03 PLC showing Fault
HI there. i am in urgent need for help. i have SLC5/03 CPU with some I/Os.Fault LED is continously blinking and PLC is not going in run mode. I...
Replies
7
Views
4,904
OZEE
O
C
SLC 5/03 Communication / Processor Issue
Hello All! I am writing today because I cannot figure this out for the life of me. Another site I am affiliated with keeps having their slc 5/03s...
Replies
10
Views
187
geniusintraining
geniusintraining
J
Sending temperature from SLC-5/02 to EZiMarquee
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Replies
1
Views
110
dmroeder
dmroeder
M
SLC 505 Outputs not firing
Hello all. I have a few SLCs in my plant and of late we've seen a weird issue: The system will be running normally and then randomly the outputs...
Replies
2
Views
121
Mark_J
M
I
Prosoft Datalogger w/ DF1 Comms to SLC 5/05 - Testing with MicroLogix
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
Replies
3
Views
128
Ken Roach
Ken Roach
Back
Top Bottom