Slc 500 Basic-t Module

randy

Supporting Member
R
Join Date
Apr 2002
Posts
158
By using the PRT1 Port can I communicate using the HyperTerminal Com1 port of my PC. I would like to modify the program inside the Module.

Thanks

rmonroe
 

Similar Topics

S
BASIC module on SLC 500- basic program question
Hi all I have a SLC 5/04 with a BAS module sending print data to a dot matrix printer. In the Basic program in this module, there are what...
Replies
4
Views
1,929
parky
P
L
Moxa Nport 5110 with Allen-Bradley SLC-500 PLC basic card
Hello, Here we have the mentionned PLC which had, in the beginning, a serial line printer connected to one of the serial port of the basic module...
Replies
0
Views
3,806
lingenieur
L
K
SLC 500 BASIC Program Invalid Header Error
I'm trying to program an EEPROM chip on an A/B SLC 500 processor with a 1746-BASIC card. I have a very simple 3 line BASIC program and I'm using...
Replies
0
Views
2,236
kevgtown
K
H
basic module SLC 500 1746 bas uploading program
Hi everyone.. I have 1 basic module SLC 500(1746 Bas), now i want to back up programmed (upload), but i dont know to cumunicate with this...
Replies
3
Views
4,719
hendro
H
A
SLC 500 Basic Module (1746-BAS)
Hi all, Just have a quick question (might be a dumb one that I should know) about how to determine what the scan time is of the module. I don't...
Replies
1
Views
3,941
plchacker
plchacker
Back
Top Bottom