[email protected] Member A Join Date Dec 2013 Location matamoros Posts 1 Dec 11, 2013 #1 i looking for quick panel junior total control software installation
RussB Lifetime Supporting Member Join Date Oct 2003 Location Michigan Posts 2,914 Dec 11, 2013 #2 You can purchase it from any GEIP supplier, locate yours here: http://support.ge-ip.com/support/index?page=spage&id=ST6&locale=en-US&locale=en_US Ask them for either QuickDesigner or Proficy ME View for QuickPanel. Typically the Proficy ME software is much less money. Also verify that you have the proper download cable. The GEIP part number is HMI-CAB-C49 for the older units without Ethernet.
You can purchase it from any GEIP supplier, locate yours here: http://support.ge-ip.com/support/index?page=spage&id=ST6&locale=en-US&locale=en_US Ask them for either QuickDesigner or Proficy ME View for QuickPanel. Typically the Proficy ME software is much less money. Also verify that you have the proper download cable. The GEIP part number is HMI-CAB-C49 for the older units without Ethernet.