SoMachine Basic V1.5 move Bits in to a Word

[Tjkeets90]

Hi

I'm trying to move bits in to a word.

I'm wanting to move %10.0 - %10.13 (Onboard Inputs) in to %MW1

I've tried moving one bit in to another bit - SW1 := MW1:X0
(%10.0 = sw1) but I can't get that to work either.

Any help would be massively appreciated.

Thanks

 

[Engineer_MG]

Check attached picture

 

[Tjkeets90]

Check attached picture

Thanks for the reply. I've tried that first off but then I get an error message; I've attached a link.

The address for the bit you shown seems to have one more digit than mine at the end but I can't see what it is even if I zoom in?

Thanks

Tom

 

[Engineer_MG]

%MW1 := %I0.0:8 . You have to give it a length at the end. I put 8 as an example.

Hope this helps.
Thanks.

 

[Tjkeets90]

Yes that's great thank you so much!