Sergei Troizky Member S Join Date Oct 2004 Location Montreal Posts 736 Sep 15, 2015 #16 Prince, you did not specify the rotation speed nor the required stop precision upon detection.
Prince Member OP Join Date Jun 2002 Posts 284 Sep 16, 2015 #17 Sergei, My main focus is on following the weld seam during the test. This seam is not necessarily straight and the probe position might need to be corrected due to mechanical vibration. My ideal speed for follower is about 50 m/min.
Sergei, My main focus is on following the weld seam during the test. This seam is not necessarily straight and the probe position might need to be corrected due to mechanical vibration. My ideal speed for follower is about 50 m/min.