mattiasLindhSw
Member
In older step7 versions it was not preferable using direct acess to UDT data in the block interface. (defined as in/out paramters to FB/FC blocks. As we all know doning this would create loads of over head code in the background, making your project grow rapidly.
What about step7 V11, is the code comiled in a smarter way, making it possible to use own defined data types (PLC data types) as in/out parameters to FB/FC block. Or is the limitation the S7 CPU itself.
What about S71200.
Anybody that have done any tests?
What about step7 V11, is the code comiled in a smarter way, making it possible to use own defined data types (PLC data types) as in/out parameters to FB/FC block. Or is the limitation the S7 CPU itself.
What about S71200.
Anybody that have done any tests?