Stop and go lights

ricke

Member
Join Date
Nov 2008
Location
WI
Posts
3
Can anyone show the ladder logic for street lights using rs5000 software and 4 timers. I seem to get hooked up last bit either for red or green.
 
Can anyone show the ladder logic for street lights using rs5000 software and 4 timers. I seem to get hooked up last bit either for red or green.
Show us what you have already and you'll receive help. We don't do homework for free, we only help those who show they have put some effort in already.

Regards,
 
Can anyone show the ladder logic for street lights using rs5000 software and 4 timers. I seem to get hooked up last bit either for red or green.

Here you go - "the ladder logic for street lights using rs5000 software" - i didn't need the timers, but you can put some in to satisfy your tutor.

For the knowledgeable - This is a working traffic light program. I have tried to get this working with only one instruction, not 2 as shown, but don't believe it is possible (without using an AOI similar to the SQO). Oh, and the code is in a 1000mS periodic task, which does the timing.

2012-02-15_001555.jpg
 
Last edited:

Similar Topics

Dear friends, happy new year 2013. I have a problem with the s5 plc 115u 943b, the stop and basf lights are "on" and the digital output is not...
Replies
9
Views
3,774
We are facing intermittent issue with emergency stop and line stop. Line stop triggering with alarm of line stop push button activated at one...
Replies
10
Views
210
Hope you are doing well. Currently, I am involed in a revamping project. It requires to stop a mixer at specific postion. For the detail, this...
Replies
9
Views
291
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
Replies
19
Views
375
I'm looking to get some spare keys for this PLC. Does anyone know a source or have a part number? My searches are turning up nothing at the moment.
Replies
1
Views
100
Back
Top Bottom