String to OPC Server from PLC

ckchew666

Member
ckchew666
Join Date
Aug 2003
Location
Malaysia
Posts
591
Hi,

I'd like to ask, if we can do DDE/OPC link copy of string to Excel?

Normally we can do integer copy from OPC server (RSlinx) to Excel, anyone tried with string?

Thanks.
 

Similar Topics

I
Problem reading string using IBH S7 Link (mpi to ethernet) using IBH OPC Server
I'm attempting to read some strings from a S7 300 PLC over ethernet. I'm using a IBH S7 Link mpi to ethernet converter and then use IBH OPC server...
Replies
4
Views
6,421
islman1975
I
K
Siemens S7-300 CP to OPC, large String with Limited backplane 187kb
Hi Guys. I hav an general question about data traffic between CPU and CP on K-Bus backplane. We got an issue where a vendor has an S7-300 cpu...
Replies
4
Views
2,314
Kasperv79
K
R
iFix to AB Controllogix using OPC v7.30 Client Driver and String Data
Can anyone provide me the correct format for the I/O address needed to access a STRING in a Controllogix 5555 from iFix using the OPC driver via...
Replies
3
Views
7,418
radfahrer
R
P
Structured Text String Alterations
Hello, I am using studio 5000 pro and am trying to figure out the structured text. Here's my scenario: An operator scans a barcode, the barcode...
2
Replies
15
Views
187
drbitboy
drbitboy
C
FTView global object - text vs String
I am creating a global object in FTView SE 13. I want to have a string read from the PLC and display (in this case the tagname). So lets say...
Replies
4
Views
171
cjjeeper
C
Back
Top Bottom