Hello everyone,
I m very new with symax.I ma working on one project in which we are adding some i/o cards in one of the remote i/o rack. The problem is in symax we have to assign address in continuous manner and we are running out of addresses.If we are adding these cards we have to change the addresses and it looks like because of this we have to change all the address for the all consecutive racks. after this rack we have 5 more racks.n beacuse of that we have to modify all the prg and with that they have scada so it looks we have to change all the addresses for communication. Can neone suggest us the best way to accomplish this. Thanks in advance.
I m very new with symax.I ma working on one project in which we are adding some i/o cards in one of the remote i/o rack. The problem is in symax we have to assign address in continuous manner and we are running out of addresses.If we are adding these cards we have to change the addresses and it looks like because of this we have to change all the address for the all consecutive racks. after this rack we have 5 more racks.n beacuse of that we have to modify all the prg and with that they have scada so it looks we have to change all the addresses for communication. Can neone suggest us the best way to accomplish this. Thanks in advance.