T2550 Communication Help

UKhayyam

Member
U
Join Date
Feb 2015
Location
Uk
Posts
2
Hi I am new, I need some help if anybody can guide me please,

Is it possible to make a communication between T2550 Eurotherm and STEP 7 PLC? If it is what external device will be required?

Thank You,
UKhayyam
 

Similar Topics

E
communication wonderware intouch 10.1 with PAC T2550
i have wonderware intouch 10.1 and PAC T2550. i made complete project and download project to FOXBORO PLC and finish project in intouch 10.1, but...
Replies
3
Views
3,996
NetNathan
N
H
T2550 from Eurotherm
HI After downloading the program to a T2550 (Temperature controller from Eurotherm) all LEDs (including fault LED) will be blinking and CPU will...
Replies
0
Views
1,431
hooman1972
H
dalporto
ProSoft MVI56E-MNETC Client Communication monitoring
Hi all. I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Replies
0
Views
34
dalporto
dalporto
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
6
Views
167
Contr_Conn
Contr_Conn
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
46
Tinx12
T
Back
Top Bottom