T47, mode2

[Ernest#Germany]

Hello, I´m using an old T47 for an PLC2 converting.
Somebody has installed MS-Dos Version 6.22 on this.
I want to use the mode2 instruction to activate an external screen. But this is instruction is not available.
Did an walkabout utility disk or an other utility disk exist for DOS 6.22 ?
Or exist an other solution to activate an external screen at the T47 ?

 

[Cody]

One option would be to contact SoftPLC Corp. They sell TOPDOC PLC-2 software that will run on a modern PC that includes a cable that connects to the PLC-2 front port so you don't need any special cards like the T47 had.