Rahul Rajgopal
Member
hi friends ,
i am working on a new project where the strain guage (4wire) is connected to plc module.the application is to calib the tank which has 2 overhead fill pipes with valves and at the bottom there is a discharge valve.initial step is to zero the tank based on weight and on adding a standard weight of 50 gms to the plc should make the tank fill till 50 gms. Please help me how to do this logic myt sound simple but i need sme1 to help me with dis....
thank you
i am working on a new project where the strain guage (4wire) is connected to plc module.the application is to calib the tank which has 2 overhead fill pipes with valves and at the bottom there is a discharge valve.initial step is to zero the tank based on weight and on adding a standard weight of 50 gms to the plc should make the tank fill till 50 gms. Please help me how to do this logic myt sound simple but i need sme1 to help me with dis....
thank you