TIA 14 to TIA 17

[2rlp]

Hi,


I had completed a project in 2017 using TIA V14. Have to duplicate the same project in another machine with a few changes. Now I have TIA V17 installed on my laptop. Tried opening the old project in TIA V17 and get the message attached.



What do I do?

 

[JesperMP]

The comfort Panel is in V13.
Move the column dividers so that you can see the full description of the message.

According to this FAQ, TIA should be able to upgrade directly from V13SP1 to V17.
https://support.industry.siemens.com/cs/us/en/view/109476392
If the panel is made with V13, it has to be upgraded to at least V13SP1 before upgrading to V17.

 

[2rlp]

Thankyou Jesper. All I had to do as you suggested, Move the Column Dividers

 

[JesperMP]

Good to hear, and what did the text say ?

 

[2rlp]

In the original software, change version of Comfort Panel. I had TIA V14 on my desktop, so changed it there and it worked