transmitting the PLC I/O status from panel to control room

[hinddhindsa]

Dear Friends,
I have a control panel with TWO AC drives ,PLC Fuji electric controlling to two VFDs based on water level in tank feedback from float switches. I want to show the status of PLC inputs & outputs (on/off) in a control room away 1 kilometer on a BMS computer.
How can i transmit data from panel to the control room over a wireless network ?. What are the possible ways of doing it.

Thanks .

 

[chud]

Ethernet radio's.
you could pull a cable.
If there is a Hmi on the control panel, most of them these days have a webserver, you could install a modem and sim card and connect via internet to the Hmi's webserver