seaston_65
Member
I have a machine here running a MicroLogix 1400.
There is an "unused" Output (O:0/2) that I wanted to use for something but I've noticed that it seems to be used.
It looks like that O:0/2 is actually set up to Pulse whenever O:0/4 is ON.
If I cross reference O:0/2 it's not is use, and I've check the entire Output word and nothing in the ladder logic is telling it to pulse, but if I monitor O:0/2 online I can see it turning ON and OFF.
Is there somewhere that you can configure an output to do this or could some other kind of issue here?
Thanks
-Shawn
There is an "unused" Output (O:0/2) that I wanted to use for something but I've noticed that it seems to be used.
It looks like that O:0/2 is actually set up to Pulse whenever O:0/4 is ON.
If I cross reference O:0/2 it's not is use, and I've check the entire Output word and nothing in the ladder logic is telling it to pulse, but if I monitor O:0/2 online I can see it turning ON and OFF.
Is there somewhere that you can configure an output to do this or could some other kind of issue here?
Thanks
-Shawn