halberd388
Member
Greetings all,
I am new to programming let alone Ladder Logic programming, having only taken 1 basic instruction/Allen Bradley hardware class yesterday. My AM wishes me to create a timer reset for 36 timers based upon 2 times (start of shift for 2 shifts), one at 05:00 and the other at 17:15 every day since we work 7 days a week; I know what I must do, using wallclock as a trigger for the CLR instructions for each timer one one rung, but I do not know what else I need to do.
We run mostly 1756 ENTB/A with Logix5555 processors (I hope I listed that correctly). Please excuse my newness, I was hired as a network admin and now I'm needed to assist the programmers for a year long project so I'm being rushed trained with very little training to speak of.
I am new to programming let alone Ladder Logic programming, having only taken 1 basic instruction/Allen Bradley hardware class yesterday. My AM wishes me to create a timer reset for 36 timers based upon 2 times (start of shift for 2 shifts), one at 05:00 and the other at 17:15 every day since we work 7 days a week; I know what I must do, using wallclock as a trigger for the CLR instructions for each timer one one rung, but I do not know what else I need to do.
We run mostly 1756 ENTB/A with Logix5555 processors (I hope I listed that correctly). Please excuse my newness, I was hired as a network admin and now I'm needed to assist the programmers for a year long project so I'm being rushed trained with very little training to speak of.