Jamal,
There is a setting in the RSLogix program where you tell it how you want to view addresses. The two methods show the same address, but a differert way of viewing it. B3:35/3 means "Binary File 3, Word 35, Word Bit 3", while B3/563 means "Binary File 3, File Bit 563". These are exactly the same memory location, but with a different method of counting bits.
See "File", "Report Options", "Program Files", "Ladder View Options", "Address Display".
There is a setting in the RSLogix program where you tell it how you want to view addresses. The two methods show the same address, but a differert way of viewing it. B3:35/3 means "Binary File 3, Word 35, Word Bit 3", while B3/563 means "Binary File 3, File Bit 563". These are exactly the same memory location, but with a different method of counting bits.
See "File", "Report Options", "Program Files", "Ladder View Options", "Address Display".
Last edited: